Pvc Windows Australia products, consist of Polyvinyl-Chloride, Stabilizer & 10% Titanium Dioxide, in order to withstand various kinds of weather condition such as ultraviolet rays and rapidly changing weather while the frame structure can slightly expand or contract. It is able to withstand high surface temperatures of up to 82oC without defects. This means that long – term sunny conditions do not cause the profile structure to break or deteriorate in quality, throughout the whole life time of your windows.
|Heat insulation and energy saving
According to a recent survey, 37% of household energy is generally lost through windows. Proper selection of windows and glass would enormously cut down this energy loss. PVC Windows Systems with 20mm insulated glass thickness, could conduct the K value of 1.65W/m2K, compared with 7.50W/m2K for general aluminium window frame. Therefore Pvc Windows Australia cut down energy loss far better than any aluminium window. This is because Pvc Windows Australia are made in hollow sections (multi chamber system) by an extrusion process, which lowers external heat dispersion into the inner area.
Pvc Windows Australia have multiple chambers inside the profile structure while the hardware system is equipped with a multi-point locking system to ensure proper closing and tightness. This efficiently reduces noise disturbance from outside, down to one-eighth of the original noise level (sound reduction ratio is between 33-43 dB).
In cities with high pollution levels Pvc Windows Australia can withstand any corrosion caused by such conditions. Even in beach area residencies, humid weather is unable to corrode or damage Pvc Windows Australia.
|Excellent Self Extinguishing material
Pvc Windows Australia are fully self-extinguishing. Polymer, the material that Pvc Windows Australia are made from, is non-combustible, due to its high chlorine concentration and the use of appropriate compounds. Pvc Windows Australia are manufactured to comply with BAL 29.
|Excellent water resistance
PVC Windows Systems employ a corner welding process to ensure that the window or door corner is completely welded into a single structure; therefore water is unable to pass through the welded joint. Additionally a double layer of TPE (thermoplastic elastomer) rubber gasket is placed around the sash and the frame to efficiently seal the gap.
Pvc Windows Australia are built with smooth surfaces and properly welded corners. Our products are available in variety of colours, therefore no more painting or maintenance required.
Pvc Windows Australia are made from ecologically friendly materials in terms of less pollutant emissions than wood and aluminium. Polymer is recyclable, and so there is no lost material as all waste goes back into the recycling process.